Stone carving machine carving depth is abnormal how to return a responsibility

Stone carving machine carving depth is abnormal how to return a responsibility

Stone carving machine carving deeper and deeper from another point of view is actually the Z-axis problem, a common reason is the z-axis drive block failure, at this time we can simply test.Switch the X-axis and z-axis drivers and start up to try. If the Z-axis problem is solved, the driver block has failed.It may also be caused by the loosening of the z-axis motor coupling, which needs to be tightened with a wrench.

In addition, there may be engraving machine Z-axis motor problem, if it is a machining center machine, if so, you need to contact the engraving machine factory, give maintenance or replacement.In addition, there may be damage to the control system, computer networking users will inevitably be some additional interference, engraving machine control system is damaged after there may be some puzzling problems, such as stone engraving machine more and more deep or more and more shallow, random machine engraving and so on.Encounter this kind of problem should reinstall sculpture software in time.Causes of z-axis of stone carving machine out of control:

1, engraving machine control business card printing loose or fault.

2. Receive static interference.

3, stone engraving machine Z-axis motor line fault.

4, file path error.

5. The engraving machine frequency converter is disturbed.

There is something wrong with the computer system of the equipment.

7. Operators do not operate in a standard way.