Safe operation of engraving machine

Before work, they must wear labor protection products. Female workers should wear working caps or hair nets, and are not allowed to wear scarves and high heels.Do not wear gloves, do not smoke, do not chat with others, focus your energy.Do not play or play in the workshop.

2. Before starting the machine tool, it is necessary to check whether the lubrication and protective devices of all parts of the machine tool meet the requirements.

3. Reasonable selection of tools and fixtures.When clamping precision workpiece or thinner, soft workpiece, clamping method should be appropriate, bite the appropriate, to ensure the clamping firm and reliable, do not strike hard, can be used wood hammer or pad lightly hit.

4. During operation, observe whether the workpiece clamping is loose at any time. If it is loose, stop immediately to avoid hurting people.When observing the workpiece during operation, the station should be appropriate.

5. When the engraving machine moves quickly, attention should be paid to the surrounding conditions to prevent collision.

6. In case of abnormal heating and abnormal sound of CNC engraving mechanical and electrical motor, the engraving machine should be stopped immediately

7. Operate in a civilized manner. Do not prevent tools, measuring tools, and workpieces on the guide rail of the machine and the work table at will.When nc engraving machine is running, do not touch the rotating parts, and do not lean on the machine.Do not transfer items from above the machine tool running parts.

8. Abide by the process specifications, and do not arbitrarily modify the set parameters and operation procedures of the manufacturer in the NC system.

9. After the operation, clean the machine, clean the workplace and disconnect the power supply.